********************************************* Broadcom Limited MegaRAID Firmware Release ********************************************* Release date: 9/13/19 ====================== Supported Controllers: ====================== MegaRAID SAS 9361-16i MegaRAID SAS 9380-8i8e MegaRAID SAS 9361-24i Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 9/13/19 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0061 (MR 6.14 Point Release) Firmware 4.740.00-8447 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0010 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.12 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Previous Package Details: Firmware Package:24.22.0-0048 (MR 6.14 Point Release) Firmware 4.740.00-8435 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.12 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Bug Fixes and Enhancements: =========================== Firmware: FW: SCGCQ02052706 - LD Inquiry still show as AVAGO_B for VD even when JBOD drive is set as boot PD. SCGCQ02141291 - Fatal FW error observed on connecting enclosure in a multipath or cascading another enclosure when slot based device ID feature is enabled. SCGCQ02142981 - Fix API changes done for NVMe readiness SCGCQ02146846 - Add NVMe width comments to mr.h SCGCQ02149370 - During SpinUpRecoveySM 2/4/1C sense data is not handled . SCGCQ02154000 - During config force clear, invader MR FW hits assertion SCGCQ02157970 - 614.1_FW: Controller is not detecting in OS on a latest FW pkg 24.21.0-0108 when expander is connected to controller and configured for zoning SCGCQ02160670 - Non boot VD gets vendor identification as "AVAGO_B" for a specific OEM SCGCQ02174924 - Firmware crashes while running IO's with flushwriteverify=on SCGCQ02057908 - Boot VD Inquiry String is not retained, after foreign importing the Boot VD configuration SCGCQ02136344 - montask observed inline 1704 in ../../raid/bootMsg.c during enclosure cable pull/push. SCGCQ02141740 - Flaky link drive connection causing a fatal error. SCGCQ02144016 - SED drive moved to fail state during device missing delay (DMD) testing SCGCQ02154597 - IOUNITPAGE 11 parameters are not updated in the next boot. SCGCQ02162341 - AVAGO_B doesn't reflect in boot VDs vendor ID if boot device is changed from JBOD to LD. SCGCQ02167986 - Cache Data Loss with ONFI double dip with bad SuperCAP SCGCQ02112533 - MR controller was missing in UEFI after reboot when the bootable JBOD drive was removed SCGCQ02118063 - TUR timeout increased from 64 sec to 120sec. SCGCQ02144003 - When slot based device ID feature is enabled, Drive Slot id and device ids are not matching after hot plug of direct attached drives SCGCQ02152834 - MR FW marks Zoned Out PHYs as bad PHYs SCGCQ02157827 - During the push pull test, with different delay for each drive , leads to assert. SCGCQ02171024 - 6.14_FW : Fatal FW error observed on iMR controller after flashing latest FW pkg 24.21.0-0111 and rebooting the system. SCGCQ01940661 - Add New Generic OOB API To Read ROC Temp, Drive Temp, Drive Type, Drive Protocol and status through OOB BMC SCGCQ01963328 - Add a new log event used whenever the snap dump properties are modified. SCGCQ01965047 - Add a bit for atomic descriptor capable SCGCQ01965721 - Add CTRL_SB_SOFT_SECURE_MODE event to indicate soft secure mode SCGCQ01985474 - Introduced new controller bit SCGCQ02000566 - Customer needs to generate and extract the On-demand based debug data both for MR and iMR. SCGCQ02002119 - Driver parameter bit for support of tool box cmd SCGCQ02006657 - Add new MFI Fault sub code for Secure Boot Preboot Auth failure SCGCQ02013675 - Reword event log messages as it creates unnecessary panic. SCGCQ02016723 - API change to support new DCMD for consolidated device list SCGCQ02030653 - Modification in MR_SNAPDUMP_TRIGGER_TYPE enum value SCGCQ02033538 - Additional details about spare SCGCQ02035295 - API change to support NVMe Passthrough over OOB SCGCQ02037158 - API change to support new DCMD for consolidated device list SCGCQ02053667 - API changes for NVMe speed and width changes SCGCQ02053671 - API changes for linkconfig interface SCGCQ02079068 - Increase in MR_PD_INFO.name length to 32 characters SCGCQ02103183 - MR Windows IOCTL Error codes to Application added to MR API SCGCQ02103973 - Add MFI STAT and MR Event for Secure Boot indicating fw dl was not allowed due to an existing pending key change SCGCQ02111563 - Better error message for certain unmap operations SCGCQ02111943 - OEM request to implement slot based device ID for direct attached or enclosure connected drives SCGCQ02123808 - As per OEM request bypassing the cache for particular workload on 512E drives. SCGCQ02125252 - Add disableOffloadNum field in MR_SNAPDUMP_PROPERTIES struct SCGCQ02144055 - Removed VDM driver workaround SCGCQ02144062 - Support LED functionality on disjoint SGPIO back-planes that report non-contiguous slot numbers SCGCQ02149380 - API changes for a better presentation of Atlas to tools SCGCQ01921241 - API changes for Lane Margining SCGCQ02030668 - Standard SCSI Inquiry vendor identification should be “AVAGO_B” for VD that is set as boot device SCGCQ02050712 - Unlocking FDE disk after a power-on-reset (POR) SCGCQ02129396 - Support Zone In and Zone Out functionality for MR 6.x Channel SCGCQ02132334 - MR API: Add support bits for currentSpeed and clkMode SCGCQ02137048 - Adding NVACHE messages indicate when SLC format has started and completed. SCGCQ02144058 - FW prints SASIOUnitPage 11 during boot up. SCGCQ02124249 - Change the order of DDF header updates when there are errors existing in DDF headers currently on the drive SCGCQ02134251 - Enhance data collection when a MU error is seen SCGCQ02136394 - Unblock and allow the SCSI pass-through commands to bad/failed/offline PDs SCGCQ02036047 - UndoActivityChangeSet: Subtractive merge of EnhancementRequest SCGCQ02035295 SCGCQ02134306 - Fixing bitmap variable order in the API SCGCQ02141379 - MR 6.14: Updating sas_ver.h for Intruder MR to 8437 SCGCQ02139071 - MR 6.14: Updating sas_ver.h for MR: 8467 iMR:8466 SCGCQ02167859 - Modify check for cache bypass for less than 4k SCGCQ02129709 - Release PA invader 6.14 MR and iMR FW RO - 8460 and 8461 SCGCQ02089424 - Correct compilation error due to latest mega API SCGCQ02048599 - Release 6.14 MR RO 8448 (SCGCQ02048595) and iMR RO 8449 (SCGCQ02048597) SCGCQ02166107 - Update Sas_Ver.h for Invader 6.14 Point Release - MR 4.680.00-8486, iMR 4.680.01-8487 SCGCQ02149255 - MR FW 6.14 Release - Updating SAS Version for Invader MR 4.680.00-8472, iMR 4.680.01-8473, Intruder 4.740.00-8438 SCGCQ02124505 - Update SAS Version for Invader 6.14 Point Release MR 8458, iMR 8459 SCGCQ02118925 - Update SAS Version for Invader 6.14 Alpha Release MR 8456, iMR 8457 SCGCQ02137448 - 6.14 ,updating sas_ver.h MR: 8465 iMR:8464, intruder:8436 SCGCQ02133381 - update sas version SCGCQ02171107 - UndoActivityChangeSet: Subtractive merge of Defect SCGCQ02169505 SCGCQ02195569 - MR 6.14: Update SAS Version for Invader and Intruder 6.14 RC Release SCGCQ02174902 - Update SAS version for 6.14.1 Alpha Releases - Intruder 24.22.0-0058, Invader 24.21.0-0114 Pkg SCGCQ02154978 - Update Sas_Ver.h for 6.14.1 PA releases - Invader Package - 24.21.0-0108 SCGCQ02151211 - Update SAS Version for Invader 6.14 Pre Alpha Release MR 8476, iMR 8477 SCGCQ02131920 - Fixing check-in issue SCGCQ02171112 - UndoActivityChangeSet: Subtractive merge of Defect SCGCQ02171024 SCGCQ02179368 - MR 6.14: Update sas_ver.h for Invader and Intruder 6.14 Point Release SCGCQ02161887 - Release 6.14 point RO's for invader iMR-8483, MR-8482 SCGCQ02139680 - Release Insur relase RO's from MR and iMR Invader 6.14 - 8468 and 8469 SCGCQ02187582 - Update Sas_Ver.h for 6.14.1 Beta Releases - Invader iMR 4.680.01-8500, MR 4.680.00-8501, Intruder 4.740.00-8445 SCGCQ02149888 - updating sas_ver.h MR:8475, iMR:8474 Intruder:8439 SCGCQ02153078 - Update Sas_Ver.h for 6.14.1 PA releases - invader package 107 and intruder package 54 SCGCQ02164596 - Update Sas_Ver.h for 6.14.1 Pre Alpha Releases - Intruder MR 4.680.00-8484, iMR 4.680.01-8485, Intruder 4.740.00-8441 SCGCQ02154954 - updating sas_ver.h ,Intruder version:8440 SCGCQ02171248 - release MR invader 6.14 8489 SCGCQ02173346 - Update SAS Version for 6.14 Intruder Point Release - 4.740.00-8442 MR Firmware SCGCQ02099935 - Controller Hang after multiple iterations of S4 Sleeper Stress Test SCGCQ02169538 - CSCuv03959 DPMR6 - System hung after abort running CC continuously overnight. SCGCQ02157830 - Initialize cache after diagnostics testing SCGCQ02140049 - EKMS 10.3: Reboot loop results in OS getting corrupted i,e 0xC000000E (Required Device is Inaccessible) SCGCQ02099404 - IO Error observed on few VD's, after setting the boot drive in NVMe Mix Mode Configuration SCGCQ02113872 - Data Abort Exception on abrupt powerloss/reset when flushing events from NVRAM hold buffer to flash SCGCQ02157832 - Security Subsystem Errors SCGCQ02187494 - DEV DEFECT: iMR 6.14 - Disable unused debug code compilations for Skinny SCGCQ02140684 - Aero A0 UTP - Atlas Config NVMe3 TM + Cable pull/push results in CORE0 fault and OCR SCGCQ02139082 - Kill Adapter if PD FW download is run in continous loop SCGCQ02190332 - DEV DEFECT: iMR 6.14 - Disable unused debug code compilations for Skinny Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom ===================================== +++++++++++++++++++++++++++++++++++++ Previous release +++++++++++++++++++++++++++++++++++++ ===================================== Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 1/18/19 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0048 (MR 6.14 Point Release) Firmware 4.740.00-8435 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.12 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Previous Package Details: Firmware Package:24.22.0-0045 (MR 6.14 Point Release) Firmware 4.740.00-8433 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.10 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ01671213 - Once pinnedcache is set to off not able to toggle field value in JBOD WB mode SCGCQ01676164 - PL Fault observed while running target reset on JBOD WB SCGCQ01685447 - Do not allow RAID config in JBOD-WB mode and prevent change of personality if WB mode is set SCGCQ01727104 - Repetitive OOB and LED prints observed in FW logs SCGCQ02023160 - MR 6.14: FW reported incorrect value for max data transfer request size as 4 MB in Storcli app. SCGCQ02056038 - xfs_info command run on an XFS file system created on a VD of strip size 1M shows sunit and swidth as 0 SCGCQ02080101 - Some Configured drives may change to JBOD and Unconfigure Good after Set JBOD=on and reboot SCGCQ01760667 - Dev defect: Incorporate the new changes done in MR API SCGCQ01770256 - Amber LED not seen for UBAD PD's SCGCQ01789188 - Kill adapter observed while running target reset on JBOD WB SCGCQ02008420 - Max number of PDs for PatrolRead to run concurrently should be in range from 1 to MR controller's max configurable PDs SCGCQ02023839 - Continuous SRAM correctable error prints followed by controller reset SCGCQ02027889 - Cannot create or mount xfs filesystem using xfsprogs 4.19.x kernel 4.20 SCGCQ01681100 - dev defect - Setting defaults for JBOD-WB mode and code cleanup SCGCQ02060813 - CV going into WT mode during learn after upgrading to versions later than 24.18.0-0021 - FW fault after factory defaults SCGCQ01624704 - SATA PD does not change to failed state after read medium error detected SCGCQ02009801 - Kill Adapter observed while running task management on JBOD-WB with IO's SCGCQ02083536 - After using hdparm to lock a SATA SSD JBOD drive the drive fails to be unlocked by the MR FW on reboot SCGCQ01670086 - Able to create RAID configuration even after it has been disabled SCGCQ01584411 - Fail the drive and do not pin the cache SCGCQ01581022 - POC in 6.14: WB support and Pinned Cache changes SCGCQ01609320 - FW changes for the configurable parameters SCGCQ02000920 - Integrated Invader PL RO - SCGCQ02000507– phase 14, Version 14.00.11.00 to MR 6.14 HII: SCGCQ01958656 - Change the Firmware Name Field in the Inventory data SCGCQ02078995 - Add a new Field for SSDSMARTerEnabled in HII Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 1/18/19 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0045 (MR 6.14 Point Release) Firmware 4.740.00-8433 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.10 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Previous Package Details: Firmware Package:24.22.0-0034 (MR 6.14 Point Release) Firmware 4.740.00-8394 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.08 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ01837230 - Invader SKINNY compilation error SCGCQ01864207 - CCVD deleted before disassociation completed SCGCQ01848030 - PCIe completion timeout seen when performing CfgRead0 requests on Vail SCGCQ01429460 - Intruder Controller Disappear during clean shutdown on OEM server SCGCQ01564333 - Problem with I2C Slave communication with external Masters that don?t support slave clock stretching. SCGCQ01582537 - controller is reporting Chip Temperature of 255 when the ambient temp is about 0 C SCGCQ01758984 - False alarm of "cache Discarded" when the System, with Invader controller + WT R5 volume, is shutdown normally. SCGCQ01758987 - IO path function accessed by both core is not synchonized. SCGCQ01824458 - OOB SCSI passthru command (READ DEFECT 12) return without response data SCGCQ01844246 - FW returns success for enabling encryption when it is failed on the drives SCGCQ01849507 - Line 535 in ../../raid/cachePreserve.c for trying to create Pinned Cache by Cable Pull. SCGCQ01862477 - logging SES event for the critical condition detected during SOD SCGCQ01882216 - Error LED cannot stay long when drive pulled from VD. SCGCQ01871964 - FW doesn't correct inconsistency with CC running SCGCQ01891580 - Supercap details are not coming in any applications SCGCQ01902852 - iMR DDF corruption SCGCQ01798672 - Locate LED stops abruptly in case of SGPIO SCGCQ01849876 - During dism , RDM retry count is not reset to zero after successful command completion. SCGCQ01854653 - DISM doesn't complete for a bad SATA drive causing other newly inserted drives to remain inaacessible SCGCQ01880133 - Montask is observed during drive push/pull overnight test SCGCQ01921599 - On UG bad PD removal and replaced with UG good PD, iMR allows Vd creation using 33 Pds SCGCQ01791042 - Unexpected enclosure Fan events seen during physical intervention SCGCQ01817807 - PL Fault 00005854 LinkRegister c132c5b8 observed while running target reset on JBOD WB SCGCQ01817808 - Kill adapter observed while running target reset on JBOD WB SCGCQ01827057 - Secured R1 VD is no longer shown as secured after an OCR SCGCQ01849392 - Change the reserve field in structure mode param to follow spc4 spec SCGCQ01851164 - [Bristrol] [MR7.4] "Previous Configuration missing" occurs during reboot test with CC running SCGCQ01851701 - VD enumeration not consistent in Foreign preview menu in eHBA personality mode. SCGCQ01856558 - FW is allowing EPD creation when there is pinned cache SCGCQ01867349 - Controller boot message for cache discarded are not populated . SCGCQ01874315 - After deleting Drive Group, dedicated hot spare assigned to the drive group did not become unconfig good(no other drive group present) and remained as global hot spare SCGCQ01874323 - MR fw doesn't report that SAS_SATA 6 G and 3G capability SCGCQ01915794 - WHQL certification suite hit L2 CACHE ERROR SCGCQ01908133 - erroneous configurable PD count decrement SCGCQ01929277 - Intruder and Invader controllers returnning vpd86 error SCGCQ01934351 - FW reports that the board passed BBU Retention test on boards that have a non operational ONFI NAND memory. SCGCQ01943613 - Integrate Invader Phase 14 PL - 14.00.10.00 Firmware MR PL Release SCGCQ01915285 - PD show all StorCLI command fails for UBAD SAS & SATA drivesSCGCQ01936541 - OOB - SCSI PassThru Command fails with error code 0x2E SCGCQ01937319 - FW Crashes when user tries to fetch SMP PassThru Info using Host SLT SCGCQ01949781 - SATA SSD not discovered by OS during hibernate test SCGCQ01904085 - Preserved Cache doesn't flush back during Foreign Import SCGCQ01955263 - Invader IMR : PD fails to get marked as foreign on insertion SCGCQ01765150 - API Changes - After Vision PSOC FW update, applications should ask the user for power cycle instead of reboot SCGCQ01792416 - Add secure boot support SCGCQ01797424 - Including The Time Stamp for every Snap Dump created in the firmware. SCGCQ01798686 - Reporting SSD wear gauge values for OEM specific customers SCGCQ01799154 - Support smp passthrough in storlib and storeliboob SCGCQ01803319 - Define new events for enhanced UNMAP support [MR7.8] SCGCQ01816724 - Deprecate the snap dump fields that are no longer needed for MR_SNAP_DUMP_PROPERTIES structure SCGCQ01824135 - Add the API to clear all the snap-dumps from firmware. SCGCQ01830211 - RTTrace Enable/Disable API changes SCGCQ01845269 - API change to provide learn complete timestamp SCGCQ01848759 - Added Support for Triggering SnapDump SCGCQ01853480 - API change to return apt failure status for a personality change request SCGCQ01871912 - Added new events for unmap policy changes SCGCQ01873417 - Added customer serial number field to MFC Manufacturing 2 structure SCGCQ01874035 - MR API changes to support EKMS over OOB SCGCQ01886424 - Interrupt coalsecing setting per group of 8 replies queues (h/w VF registers) SCGCQ01887495 - API change to export "disable least latency mode" SCGCQ01888257 - Support SC_INQUIRY and SC_LOG_SENSE SCSI Passthrough commands on drives in bad state for a particular OEM SCGCQ01916035 - Support smp passthrough storeliboob (API changes requirement) SCGCQ01928254 - Add secure boot key update complete event SCGCQ01931637 - Add Board Support Package Image Type to MR_IMAGE_TYPE SCGCQ01946548 - Fix MR_CTRL_INFO to support backward compatibility SCGCQ01969605 - With ESXi 6.7 OS or latter, a SATA SSD drive that is configured as EPD will be dropped by OS when driver reload is done SCGCQ01822167 - Controller Fails the command when host issues read CDB with zero blocks SCGCQ01874302 - Unable to recover config when changing security password before re-inserting drives SCGCQ01886616 - Same EID assigned to 2 930-8i controllers SCGCQ01904092 - MCTP over PCIe discovery HII: SCGCQ01826500 - JBOD drives are not sorted in JBOD to UG converion page SCGCQ01825028 - Request to add NVDATA and PNP IDs for new card introduction SCGCQ01861865 - Move Sorting logic in HF000 before set browser Data. Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 10/05/18 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0034 (MR 6.14 Point Release) Firmware 4.740.00-8394 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0008 UEFI_Driver 0x06180203 (SIGNED) Hii 03.25.05.08 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0603 Previous Package Details: Firmware Package:24.22.0-0023 (MR 6.14 Point Release) Firmware 4.740.00-8288 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0004 UEFI_Driver 0x06180202 (SIGNED) Hii 03.25.05.04 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0602 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ01844264 - memset the deviceStateLedBitmap properly SCGCQ01839662 - Line 535 in ../../raid/cachePreserve.c for trying to create Pinned Cache by Cable Pull. SCGCQ01830718 - FW returns success for enabling encryption when it is failed on the drives SCGCQ01719006 - OCR getting disabled after NVRAM delete SCGCQ01718911 - Customer specific 3108 PCIe add-on card fails to come back while resuming from sleep state S3 SCGCQ01717743 - Revert code changes from CSET SCGCQ01569257 SCGCQ01714445 - Storcli shows R0 VD as WB in JBOD personality where as FW shows in WT mode SCGCQ01676080 - When NVRAM value is read from cached address ,primary core reads stale value and skips writing to NVRAM. SCGCQ01669508 - Pd firmware download timer is calculated accordingly SCGCQ01640234 - IO path function accessed by both core is not synchonized. SCGCQ01627751 - False alarm of "cache Discarded" when the System, with Invader controller + WT R5 volume, is shutdown normally. SCGCQ01623254 - Increase the recon BB list entries to align with BBM MAX BAD entries SCGCQ01615779 - 'CacheVault Flash Size' is showing as 3.0 GB after upgrading FW when it should show 4.0 GB SCGCQ01573393 - MR FW memory Leak across driver load/unload SCGCQ01531136 - Incorrect Model Number read from flash SCGCQ01529830 - On performing a cable pull/push operation during drive is in failed state, result to MonTask SCGCQ01497858 - MR 3108 controller BIOS stop at 3 different initialization screen SCGCQ01494761 - IO access to iMR FW will fail after sveral powercycle SCGCQ01494566 - iMR Compilation fails even with RELEASE option in 6.12 SCGCQ01405242 - Enable WB support via API SCGCQ01793262 - OOB SCSI passthru command (READ DEFECT 12) return without response data SCGCQ01616551 - F/W Hangs during reboot SCGCQ01520940 - iMR compilation breaks, exceeding 1MB flash region allocated SCGCQ01514867 - Extend iMR change of trap related data should be in same module as trap ISR. SCGCQ01507504 - Workaround for IO access to iMR FW will fail after sveral powercycle on 3004 controller. SCGCQ01443277 - Problem with I2C Slave communication with external Masters that don’t support slave clock stretching. SCGCQ01454973 - controller VPD info is hidden as per OEM request SCGCQ01555943 - Firmware discovery is not listing all the drives after removal/insert Enclosure Cable with IO SCGCQ01227051 - New events for PR/CC conflicts and sector size mismatch SCGCQ01826466 - Request to add NVDATA and PNP IDs for new card introduction SCGCQ01764776 - Integrate Intruder Phase 14 PL - 14.00.10.00 Firmware MR PL Release SCGCQ01760512 - API changes reversal SCGCQ01748252 - Provide customized default smartpollinterval to 30 for iMR3004 product SCGCQ01745568 - RTTrace API Changes SCGCQ01727346 - API changes needed to support eHBA product series SCGCQ01716598 - Integrate Invader phase 12.00.14.00 PL with MR 6.12 SCGCQ01713708 - Create sanitize events SCGCQ01713149 - Memset the PinnedDataStructure when DRAM dirty signature is zero SCGCQ01698033 - PL Integration: Integrate Intruder PL phase 13.00.10.00 with MR 6.13 Intruder SCGCQ01682170 - Integrate latest phase 14.0 - 14.00.08.00 PL with MR 6.14 SCGCQ01681106 - as per customer request enabled FBU02 and 4G TFM support SCGCQ01628177 - Modify event string APIs for MISSING and OFFLINE LDs SCGCQ01599607 - New configuration params added for EPD-PT devices SCGCQ01595347 - MR API change request to Enable/disable the parallel PD FW update feature based on PNP ID’s SCGCQ01593998 - Integrate latest phase 14 PL with MR 6.14 SCGCQ01589431 - Integrate Invader Phase 14 PL - 14.00.06.00 Firmware MR PL Release SCGCQ01581032 - Add support to defeature Cached I/O policy SCGCQ01580766 - Integrate phase 12 PL (12.00.13.00) with MR 6.12 SCGCQ01567770 - Implement Snapdump debugging capability SCGCQ01452026 - Enable DO_REAL_TIME_ISP and DO_DISABLEISP_CLAMP flags while flashing CPLD for Intruder cards SCGCQ01403999 - Fail to Set SSDSmartErEnabled to TRUE when copyback is disabled SCGCQ01289924 - Add "Incompatible with Profile" event SCGCQ01216848 - Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01445048 - Add a new structure to provide OEMs ability to switch to select either I2C or PCIe as an out of band transport SCGCQ01450245 - Provide OEMs ability to select either I2C or PCIe as an out of band transport SCGCQ01467149 - Update description of MR_DCMD_CTRL_PERSONALITY_SET Dcmd SCGCQ01587230 - Add support for API fields to report SED type of PD SCGCQ01593520 - Add OnOff parameter in Properties2 of Structure MR_CTRL_PROP to enable/disable mix of Enterprise & Opal SED drives SCGCQ01614689 - NVDATA parameter to OPAL SED SCGCQ01620350 - Added a new interface between driver-aops to indicate if 64 bit SGL support is enabled SCGCQ01670135 - Add new MFI Status to block requested operation due to existing controller configuration SCGCQ01670234 - Change the mr.h API comment showing the new return status for the - MR_DCMD_PD_GET_INFO SCGCQ01697667 - API change for Switch attached NVMe HW RAID support for Supermicro backplanes SCGCQ01757538 - Mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled. SCGCQ01758062 - Unmap: Define new API for enhanced UNMAP support SCGCQ01762153 - Adding API bit to indicate whether forced personality change is supported or not. SCGCQ01727448 - Request to enable JBOD for Rambler PNP ID SCGCQ01698045 - PL Integration: Integrate Invader Phase 13.00.10.00 PL with MR 6.13 Invader SCGCQ01625968 - Reverted the DDR tuning values SCGCQ01563144 - Porting the changes of NVRAM_Struct from MesaVerde stream to 6.14 SCGCQ01553249 - Enhance Messaging Unit error ISR to dump debug information of virtual functions having error SCGCQ01386919 - Block OCR after Clearing NVRAM SCGCQ01532045 - Added MR_MFC_DEFAULTS.NVMeAbortTO and MR_MFC_DEFAULTS.NVMeMaxControllerResetTO SCGCQ01575960 - FW to fail back host command for the wrong value CTRL-R: SCGCQ01768424 - Ctrl-R hang after certain operations BIOS: SCGCQ01446924 - System stops at post in legacy mode boot in the multi controllers configuration where-in one of the controller is in fault state SCGCQ01832251 - When Option ROM is enabled in System BIOS, behavior is not same as SCGCQ00335839 UEFI Driver: SCGCQ01383115 - With pinned cache generated, HII is auto launched during system Boot when BIOS Mode is set to Ignore Errors HII: SCGCQ01401537 - Do not check PD operation count to Refresh Drive Management form SCGCQ01407034 - Fix Check All issue in Assign Dedicated HotSpare form SCGCQ01407038 - Check All option is not working properly in Make JBOD form SCGCQ01443719 - Virtual Drive information is incorrect in preview foreign configuration form in HII SCGCQ01446905 - iMR HII will jump to some form unexpectedly when import foreigh configuration SCGCQ01446899 - change Default setting in Select Media Type in HII from HDD to Both Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 02/02/18 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0023 (MR 6.14 Point Release) Firmware 4.740.00-8394 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0004 UEFI_Driver 0x06180202 (SIGNED) Hii 03.25.05.04 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.2 CTRL-R 5.19-0602 Previous Package Details: Firmware Package:24.22.0-0013 (MR 6.14 GCA) Firmware 4.740.00-8247 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0004 UEFI_Driver 0x06180200 (SIGNED) Hii 03.25.05.00 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.0 CTRL-R 5.19-0600 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ01268412 - Unable to access device PD (SSD) SCGCQ01287286 - OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned) SCGCQ01343017 - No amber LED when a configured disk is removed SCGCQ01348114 - Controller fails to boot up when migrated from 6.13 to 6.14 FW for Specific OEM SCGCQ01350295 - Value defined for the DDR turning parameter DP_IO_VREF_1_2 is wrong for invader boards SCGCQ01368845 - 4G DDR tuning value has to be changed in MR FW. SCGCQ01375977 - Controller Disappear during clean shutdown on OEM server SCGCQ01378970 - FW breaks into montask with pinned cache and foreign configuration SCGCQ01395084 - FW reported tmm Date of Manufacture 15/25/6 SCGCQ01399701 - Interrupting Offload will Lead to Next offload cycle to fail SCGCQ01440768 - Parameter Page Invalid, Setting channel count based on DDR Size. SCGCQ01446811 - Addressing PCIe credit free issue. SCGCQ01455133 - Firmware upgrade/downgrade operation failing on iMR controller SCGCQ01455949 - On iMR & for 2 enclosures connected in cascaded multi path , power off and then power on the 1st enclosure, PDs not getting detected SCGCQ01465727 - 6.14 : Reverting the sysDma changes SCGCQ01473188 - SED Drive become UBad during secure erase on MegaRAID 9361-8i controller SCGCQ01347858 - Found invalid event SCGCQ01375071 - Placement of an image checkword at data area of NOR flash leads to controller crash SCGCQ01394288 - MR : Cache data Lost when Term Log is set to "on" and grown bad blocks are there in the controller SCGCQ01400807 - Learn cycle shown as active when Learn cycle fails SCGCQ01403292 - Firmware allows to add bad blcoks beyond actual number of blocks. SCGCQ01472217 - linker error resolved SCGCQ01395724 - NVCache state not transitioning from 'Faulty' to 'Ok' until after reboot SCGCQ01439651 - Porting of firmware download fixes SCGCQ01446965 - SSD SATA JBOD discovered as 0.0MB after re-loading the same driver. SCGCQ01264142 - New fault code for routine synchronous reset SCGCQ01459161 - Integrate phase 14 PL - 14.00.08.00 with MR 6.14 SCGCQ01452102 - customer request for GPIO support. SCGCQ01401110 - PL 14.00.07.00 integration to MR 6.14 SCGCQ01386225 - Integrate phase 14 PL - 14.00.06.00 with MR 6.14 SCGCQ01373161 - FW not responding to PWR_REQ in time. Request to up the number of TURs sent before timing out drive. SCGCQ01369359 - Disable OOB communication via I2C SCGCQ01334112 - PL phase 13.0007.00 integration with MR 6.13 SCGCQ01276465 - PL integration 12.00.10.00 with MR 6.12 SCGCQ01268897 - Integrated PL 12.0.9.0 with MR 6.12 SCGCQ01188711 - Define interface to support firmware assisted VD/JBOD properties(max IO size, device queue depth..) SCGCQ01221705 - 24i/28i : Need to identify Controller has onboard Enclosure through NVDATA. SCGCQ01472061 - CacheCade: IO performance need to be improved for WB SVD and WB CCVD combination for specific PnP ID SCGCQ01403814 - FW breaks into montask with pinned cache and foreign configuration SCGCQ01394348 - Boot message string change for BOOT_MSG_CACHE_DISCARD SCGCQ01384265 - PL 14.00.05.00 Integration with Invader MR 6.14 SCGCQ01466802 - Setting DDR flag for ROMB design having new DDR for an OEM SCGCQ01394920 - Block OCR after Clearing NVRAM SCGCQ01351442 - Firmware hits montask while reconstruction when drive is pulled out SCGCQ01349420 - Cache data lost event seen for WT vds SCGCQ01421934 - Check Consistency doesn't identify double media errors once aborting and starting CC again SCGCQ01350347 - Kill adapater observed while running IO's on 240 Volumes SCGCQ01291340 - RAID10 VD goes to failed state after performing RLM SCGCQ01446983 - PL considers Timer Handle=0 and invalid, MR FW did not. SCGCQ01339330 - MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations SCGCQ01334365 - MR_6.14: PCI Trapping ISR incorrect logic for config trap address SCGCQ01331892 - Driver crashed after FW update via UCSM SCGCQ01326394 - HW workaround implementation for SCGCQ00830272 and SCGCQ01048567 SCGCQ01306491 - Firmware:- Request to change 9361-8i) to permanently disable SDS Mode and JBOD Mode SCGCQ01280567 - MR_6.13:FW flash pack -30 with reboot , result to Controller hang at bios level (Power PC) SCGCQ01260889 - Firmware halts upon changing controller personality to JBOD mode with MCTP enabled SCGCQ01356192 - IOMMU fault at address 0x80360000 SCGCQ01311731 - 6.14 : To fix IOPATH overflow during linking SCGCQ01412827 - Controller hang at DCR Err Logg Address 29e02. SCGCQ01351052 - FC: 0 CS: 0 offload meta signature not valid, ffffffff observed in FW logs on a system restart. SCGCQ01334334 - Controller hangs in primary core on reboot in OEM server SCGCQ01446963 - Revert the DDR tuning values back to default value SCGCQ01351559 - MR 6.13: Blocked Spin down Pass thru command for configured drives. SCGCQ01350771 - No amber LED when a configured disk is removed SCGCQ01304919 - PL Fault 0000601e observed while running multipath on/off script in JBOD mode. SCGCQ01290418 - Storcli Failed to create single PD R0 from UGood drive which has replaced a UBAD foreign drive SCGCQ01289194 - IN FAILED ARRAY bit is not being set when a VD is cleared SCGCQ01255837 - RDM in Use-RDm Error & crashed into Montask during boot SCGCQ01367331 - LSA hangs when user try to change drive security key. SCGCQ01447780 - Controller crash observed while running OLTP workload (4K and 16K 16QD) SCGCQ01304921 - PL Fault 0000601e observed while running multipath on/off script in JBOD mode. SCGCQ01348658 - Firmware crashes during medium error recovery and Rebuild SCGCQ01402828 - MR7.3: 4k PD Configuration can't be imported from iMR to MR Controller. However, it can be imported from MR to iMR SCGCQ01328038 - Controller hang with FDE Drive SCGCQ01415424 - Parameter Page Reads fail during ONFI bringup. CTRL-R SCGCQ01497428 - Firmware crash when trying to traverse through Ctrl-H tabs when cable is removed SCGCQ01382063 - Data Abort Exception while entering CTRL R BIOS SCGCQ01379365 - System reset is initiated twice in BIOS SCGCQ01379238 - Drive ID shown in BIOS POST is more than 1000+, even thought the total drives is only about 160 SCGCQ01379284 - Reset Type and customer messaging for system resets initiated by controller oprom SCGCQ01446924 - System stops at post in legacy mode boot in the multi controllers configuration where-in one of the controller is in fault state UEFI Driver SCGCQ01383115 - With pinned cache generated, HII is auto launched during system Boot when BIOS Mode is set to Ignore Errors. SCGCQ01349431 - Firmware Management Protocol - Firmware update fails with inappropriate message when trying to update an unsigned component SCGCQ01376694 - Issues in UEFI driver when FW is in fault state SCGCQ01376714 - Debug print shown on the console from the UEFI Driver error path. SCGCQ01379235 - Cursor below text and in center of line on the system reset request screen. SCGCQ01376551 - Reset Type and customer messaging for system resets initiated by controller OpROM SCGCQ01351615 - Change the logic for reentering to main entry point in UEFI Driver HII SCGCQ01384295 - HII in "Create Logical Drive" page shows JBOD present in the system , even if there are no JBODs present SCGCQ01376636 - Use SetMem before filling drive name SCGCQ01376606 - For SuperCap, HII has the primitive 'Remaining Capacity' which is different compared to other host utilites SCGCQ01446905 - MR HII will jump to some form unexpectedly when import foreigh configuration SCGCQ01446899 - change Default setting in Select Media Type in HII from HDD to Both SCGCQ01407034 - Check All is not working in Assign Dedicated HotSpare form SCGCQ01348102 - Click on "OK" button after completing any operation doesn't have any effect in the screen SCGCQ01446908 - Use SetBrowserData for VD and PD Mngt Refresh functions. SCGCQ01401537 - The physical drive operation % increase in progress is not getting updated SCGCQ01373600 - Delay seen during boot in case of 240 PD configuration. SCGCQ01356100 - Save Debug log: Free the memory in error path SCGCQ01349342 - Foreign Configuration Preview screen also has entries of virtual drives that are optimal in state. SCGCQ01356104 - HII - Fast Init progress shows 0% despite it already completed SCGCQ01356102 - RSOD seen when user browse to Enclosure Management Page SCGCQ01443719 - Virtual Drive information is incorrect in preview foreign configuration form in HII. SCGCQ01407038 - Check All option is not working properly in Make JBOD form SCGCQ01356098 - Replace hardcoded SDV Part number with Mass Production Part Number SCGCQ01349369 - Customize the configuration help message. SCGCQ01376658 - HII shows wrong Temperature value when Sensor status is "Not Installed" SCGCQ01376653 - Foreign configuration page seen after changing profile to NVMe. SCGCQ01356101 - HII produces "Success" page for unsuccessful operation when saving controller events Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 06/23/2017 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your 9361-16i MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.22.0-0013 (MR 6.14) Firmware 4.740.00-8247 ROMENV 1.09 BootBlock 3.10.01.00-0003 NVDATA 4.1705.00-0004 UEFI_Driver 0x06180200 (SIGNED) Hii 03.25.05.00 (SIGNED) FCODE 4.19.08.00 BIOS 6.36.00.0 CTRL-R 5.19-0600 Previous Package Details: Firmware Package:24.19.0-0047 (MR 6.13) Firmware 4.720.00-8218 ROMENV 1.09 BootBlock 3.10.01.00-0000 NVDATA 4.2510.01-0051 UEFI_Driver v0x06160200 (SIGNED) Hii v03.23.06.00 (SIGNED w/correct Size) FCODE 4.19.08.00 BIOS 6.34.01.0 CTRL-R 5.18-0403 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ00857533 - (Resolved) - Kill adapter in line 1272 in file ../../raid/1078dma.c after pulling enclosure cable with IOs running on 240VD, JBOD SCGCQ01083581 - (Closed) - Activity LED is always ON even when no drives are present. SCGCQ01201958 - (Closed) - MR 6.13: Blocked Spin down Pass thru command for configured drives. SCGCQ01213915 - (Closed) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment. SCGCQ01215003 - (Closed) - Setting all the ldtoTgtId with 0xff beyond 240 entries. SCGCQ01223284 - (Closed) - MR_EVT_PD_ERROR_STATS events are logged when drive is moved to REBUILD/UNCONFIGURED BAD/ONLINE/OFFLINE. Also correct DCMD SCGCQ01227115 - (Closed) - FW crashes when FW update(OFU) is done with faluty onfi SCGCQ01230560 - (Closed) - Coverity issues:fixed the coverity defects. SCGCQ01230749 - (Closed) - MR6.12 NVRAM Overflow - incomplete FW logs SCGCQ01232275 - (Closed) - Update the MAXTransferLength properly for Driver enabled 1MB support feature SCGCQ01235505 - (Closed) - Assertion failure in ../../dm/mpt2/mptrec.c at line 3139, while performing cable pull/push operation. SCGCQ01236287 - (Closed) - corrected the span index SCGCQ01241568 - (Closed) - Coverity issue 15748 and 17765 SCGCQ01241680 - (Closed) - Drive Strength values are incorrect for last 8 phys of 24i Controller SCGCQ01242817 - (Closed) - Change Slew Rate on dual rank 24i Boards to fix ECC Errors. SCGCQ01252243 - (Closed) - Firmware halts upon changing controller personality to JBOD mode with MCTP enabled SCGCQ01256120 - (Closed) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors. SCGCQ01258563 - (Closed) - Assertion failure in ../../raid/2108vI2o.c at line 2398 on flashing firmware SCGCQ01282181 - (Closed) - Storcli Failed to create single PD R0 from UGood drive which has replaced a UBAD foreign drive SCGCQ01285595 - (Closed) - Coverity reported an uninitialized variable SCGCQ01288297 - (Closed) - Reboot the system with 240 R0 Volumes and changing the mode->JBOD is hitting Montask. SCGCQ01288781 - (Closed) - PL Fault 0000601e observed while running multipath on/off script in JBOD mode. SCGCQ01289147 - (Closed) - erase types and startSecureEraseNonSED is set accordingly SCGCQ01290201 - (Closed) - Modify NVDATA boot message to rename 'NVDATA image' to 'firmware image' SCGCQ01313607 - (Closed) - Cache data lost event seen for WT vds SCGCQ01313950 - (Closed) - Kill adapater observed while running IO's on 240 Volumes SCGCQ01316152 - (Closed) - Coverity: Fixing Coverity defect 16148 SCGCQ01318465 - (Closed) - Fixing the coverity raised issue SCGCQ01319291 - (Closed) - Coverity issue 19341 SCGCQ01323607 - (Closed) - HW workaround implementation for SCGCQ00830272 and SCGCQ01048567 SCGCQ01323848 - (Closed) - auto config is not happening in some cases after issuing storcli /cx set autopdcache=r0 SCGCQ01332706 - (Closed) - MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations SCGCQ01332947 - (Closed) - MR_6.14: Intruder PCI Trapping ISR incorrect logic for config trap address SCGCQ01334292 - (Closed) - ntruder: Fix the Intruder Boot Block compilation and warning issue. SCGCQ01342601 - (Closed) - Imr Invader FW crashes while upgrading from Pkg 24.18.0-0021 to Pkg 24.21.0-0007. SCGCQ01351483 - (Resolved) - MR_INVADER_WORKAROUND_PCIE_IGNORE_REPLY_PARITY_ERROR macro definition missing SCGCQ01204592 - (Closed) - Fatal Firmware error when connecting to straight without Group ID support. SCGCQ01221549 - (Closed) - FW does not fail unsupported erase type for a PD SCGCQ01222318 - (Closed) - Allow Cyrpto erase on non-System PD's and non RAID PDs(ISE capable drives) and monitor the erase progress. SCGCQ01227079 - (Closed) - Fix coverity reported issue SCGCQ01230441 - (Closed) - FW is not updating EPDs list exposed to host after drives removal event is posted which is causing dev nodes are not getting deleted on drive removal SCGCQ01235661 - (Closed) - Diagnostics report of iMR Invader contains information about R6 and R60 is set to 0 SCGCQ01237252 - (Closed) - Enable MR_DCMD_PD_ERROR_STATS and the event MR_EVT_PD_ERROR_STATS only for direct attached drives SCGCQ01252111 - (Closed) - DATA TLB ERROR, While connecting controller each Port to Back-Plane sequentially. SCGCQ01256005 - (Closed) - MR 6.13.1Alpha:Probable Drive/cable issue Event not printed in firmwarelogs on triggering drive/cable error when connected BP SCGCQ01280181 - (Closed) - Controller cache discarded due to memory/battery problem SCGCQ01283507 - (Closed) - Perf-Win:Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD SCGCQ01299214 - (Closed) - Coverity issues 19244, 19245, 19246 and 19248 SCGCQ01299482 - (Closed) - MR 6.14 Intruder(Vail): Intruder Controller hangs in primary core on reboot in Dell Power Edge T620 server. SCGCQ01300678 - (Closed) - Fix coverity issue 19253 Structurally dead code in checkCacheOffloadStatus, raid/1078init.c SCGCQ01300689 - (Closed) - coverity defects fixed SCGCQ01317039 - (Closed) - To fix coverity issue 17759 SCGCQ01299424 - (Closed) - FC: 0 CS: 0 offload meta signature not valid, ffffffff observed in FW logs on a system restart. SCGCQ01285311 - (Opened) - High DB and Log write-latency issues with Intruder for R0 in MS-Jetstress benchmarking SCGCQ01300667 - (Closed) - MR 6.14 - Fix coverity issue 19238 SCGCQ01301658 - (Closed) - Coverity issue 15356 SCGCQ01209605 - (Closed) - update the boundary values in UpdateFeatureSetValues() SCGCQ01250342 - (Closed) - FW hang finaly leading to kill adatper with inBox driver SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public) SCGCQ01341925 - (Implemented) - Integrate Intruder PL 14.00.04.00 with MR 6.14 SCGCQ01330898 - (Implemented) - PL integration SCGCQ01307233 - (Implemented) - Integrate PL phase 14.00.02.00 with MR 6.14 SCGCQ01260431 - (Implemented) - PR State Machine Clean up during Patrol Read/Check Consistency Conflicts SCGCQ01258853 - (Implemented) - Firmware:- Request to change OEM (9361-8i) to permanently disable SDS Mode and JBOD Mode SCGCQ01255385 - (Closed) - Enable JBOD support in MR6.x for OEMID=9 ONLY for the Sebastian (9361-8i) PCI IDs. SCGCQ01253696 - (Implemented) - Revert the DDR tuning changes for specific PCI IDs. SCGCQ01238286 - (Closed) - Integrate intruder PL 13.00.04.00 (SCGCQ01237533) SCGCQ01238126 - (Closed) - Integrate PL 13.00.04.00 to MR_FW_SAS3_6.13_4G_DDR SCGCQ01231972 - (Closed) - MR 6.12: Adding Intruder PL library Version 12.0.5.0 SCGCQ01228949 - (Closed) - Open up MR_DCMD_CFG_AUTOCFG for iMR for GET operation SCGCQ01224232 - (Closed) - Revert the DDR tuning changes for specific PCI IDs. SCGCQ01223351 - (Closed) - Integrating PL - SCGCQ01169053 into 6.1_Patch new It stream. SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality SCGCQ01215397 - (Closed) - Customer requesting digitally signed FW packages on their Intruder controller SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue SCGCQ01194361 - (Closed) - Integrating PL (SCGCQ01189907) 10.00.11.00 invader 6.10 SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01304141 - (Closed) - Integrate 13.00.06.00 PL to MR 6.13 SCGCQ01273435 - (Closed) - PL Checkin for phase 13.00.05.00 - PL RO SCGCQ01273246 SCGCQ01254954 - (Closed) - Add additional sense data to firmware tracker list SCGCQ01219862 - (Closed) - Method for determining bad ONFI flash via Storcli & SNMP trap upon NAND flash failure for Invader and Intruder SCGCQ01137359 - (Implemented) - IN FAILED ARRAY bit is not being set when a VD is cleared SCGCQ01215270 - (Closed) - Isolating faulty cable issue from bad drive issue SCGCQ01268896 - (Implemented) - PL integration SCGCQ00893669 - (Port_Complete) - Medium error correction events were not reported SCGCQ00895474 - (Port_Complete) - Invader 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps SCGCQ00895481 - (Port_Complete) - Invader 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps SCGCQ00895482 - (Port_Complete) - Invader 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps SCGCQ00946612 - (Port_Complete) - Sanity check for handling the cases where event length comes up as zero/ rPtr goes beyond iptr SCGCQ01093890 - (Port_Complete) - Storecli not showing vd after personality switch from sds to raid SCGCQ01149764 - (Port_Complete) - iMR: Drives with configuration is getting converted to JBOD if system already has maximum configurable drives. SCGCQ01180873 - (Port_Complete) - Function in FW (injectParityErr) doesn't work to generate i-cache parity error SCGCQ01186523 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01191484 - (Port_Complete) - MR 6.12 Solaris 11.3 X86: "MonTask: line 2357 in file ../../raid/2108vI2o.c" while running IO's on 64 VD's with OCR. SCGCQ01198744 - (Port_Complete) - Unexpected all device insert event causes logical state change and VD deletion SCGCQ01219839 - (Port_Complete) - L2/L3 Cache error was detected on the RAID controller during boot (24 hours after shutdown hang) SCGCQ01219897 - (Port_Complete) - IMR_6.13: Drive is not marked as Foreign upon OCR when controller already has max configured PD's SCGCQ01219985 - (Port_Complete) - MR6.10_FW : CRC mismatch and invalid log event found while querying for Controller properties and learn cycle in parallel. SCGCQ01220128 - (Port_Complete) - Rebuild Error on PD (Error f0) with iMR 9341-8i (SAS3008 Fury) SCGCQ01220159 - (Port_Complete) - FW pkg 23.22.0-0017 and later initialize drives ~50% slower SCGCQ01229234 - (Port_Complete) - Intruder_2G DDR Write Timeouts with Medusa DM discovery issue SCGCQ01229929 - (Port_Complete) - MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs SCGCQ01232073 - (Port_Not_Required) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment. SCGCQ01232103 - (Port_Complete) - Open up MR_DCMD_CFG_AUTOCFG for iMR for GET operation SCGCQ01235056 - (Port_Complete) - FW crashes when FW update(OFU) is done with faluty onfi SCGCQ01237142 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment. SCGCQ01238262 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01238639 - (Port_Complete) - Storecli not showing vd after personality switch from sds to raid SCGCQ01241870 - (Port_Complete) - Storcli failed to stop drives LED locating with a range SCGCQ01242590 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01242592 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01242596 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01242597 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01242649 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs SCGCQ01242650 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs SCGCQ01242651 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs SCGCQ01242766 - (Port_Complete) - MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs SCGCQ01243833 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs SCGCQ01243834 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs SCGCQ01245596 - (Port_Complete) - unable to encrypt disk when using no pass-phrase on WebBIOS SCGCQ01245782 - (Port_Complete) - Offline Marked DG (RAID0) appearing in RHEL 7 install SCGCQ01247063 - (Port_Complete) - Cache Offload test fails with Armstrong controllers in Intel Servers. SCGCQ01247264 - (Port_Complete) - SAS2208 card reset in DataCenter due to unknown reason SCGCQ01255838 - (Port_Complete) - RDM in Use-RDm Error & crashed into Montask during boot (SCGCQ01147739 OEM DU issue) SCGCQ01256109 - (Port_Complete) - MR7.0 - DC when a PD is made offline during RLM of single Dr. R0 to 4 Dr. R1 (PRL11) SCGCQ01256178 - (Port_Complete) - Make GPIO drive strengths configurable via NVDATA. SCGCQ01262837 - (Port_Complete) - FD33xD issues in VMWare SCGCQ01263811 - (Port_Complete) - FD33xD issues in VMWare SCGCQ01265413 - (Port_Complete) - OEM 32MB Image doesn't boot on PP boards SCGCQ01266168 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors. SCGCQ01266169 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors. SCGCQ01266300 - (Port_Complete) - FD33xD issues in VMWare SCGCQ01267801 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment. SCGCQ01267851 - (Port_Complete) - Cache data Lost when Term Log is set to "on" SCGCQ01268059 - (Port_Complete) - Handling of DCR errors in MSS core SCGCQ01269779 - (Port_Complete) - Auto refresh is not happening when LD is deleted during rebuild is in progress SCGCQ01274496 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment. SCGCQ01287082 - (Port_Complete) - unable to encrypt disk when using no pass-phrase on WebBIOS SCGCQ01291492 - (Port_Complete) - Controller cache discarded due to memory/battery problem SCGCQ01294884 - (Port_Complete) - Cannot stop patrol read on PD with medium errors by the stop cmd SCGCQ01297666 - (Port_Complete) - Code review: turn off the onfi when bbu is bad SCGCQ01299260 - (Port_Complete) - Code review: turn off the onfi when bbu is bad SCGCQ01300759 - (Port_Complete) - Perf-Win:Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD SCGCQ01326069 - (Port_Complete) - OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned) SCGCQ01332726 - (Port_Complete) - driver crashed after FW update via UCSM (UCSM bundle 2.2(8fS2)A/B to 3.1(2.163)A/B) SCGCQ01351614 - (Port_Not_Required) - Controller fails to boot up when migrated from 6.13 to 6.14 FW for Specific OEM SCGCQ00945335 - (Port_Complete) - Sanity check for handling the cases where event length comes up as zero/ rPtr goes beyond iptr SCGCQ01219901 - (Port_Complete) - Controller became unresponsive after hitting OCM error SCGCQ01232131 - (Port_Complete) - Invader 6.13-Beta: MonTask: line 3386 in file ../../dm/src/devmgr.c while running JBOD IO on SAS SSD with cable pull push SCGCQ01241869 - (Port_Complete) - Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970-01-28) SCGCQ01243832 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs SCGCQ01243836 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs SCGCQ01248969 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs SCGCQ01261095 - (Port_Complete) - FD33xD issues in VMWare SCGCQ01265514 - (Port_Complete) - MR_EVT_ARGS_PD_INQ structure giving wrong PD side as part of the event SCGCQ01273187 - (Port_Complete) - Configuration lost and system crashed on having a stale configuration connected SCGCQ01273960 - (Port_Complete) - MR_6.13:FW flash pack -30 with reboot , result to Intruder Controller hang at bios level (Power PC) SCGCQ01223113 - (Port_Complete) - Request not to reset the Idle Timers. SCGCQ01235753 - (Port_Complete) - 16i - All 10T SAS HDDs can't be detected after setting spinupdrivecount=4 SCGCQ01311439 - (Port_Complete) - SAS2208 card reset in DataCenter due to unknown reason SCGCQ01247082 - (Port_Complete) - Drive Strength values are incorrect for last 8 phys of 24i Controller SCGCQ01282285 - (Port_Complete) - Firmware hits montask while reconstruction when drive is pulled out SCGCQ01299219 - (Port_Complete) - Code review: turn off the onfi when bbu is bad SCGCQ01265445 - (Port_Complete) - GetAllLDAllowedOperation call in Storelib is not returning Allowed operations when some LDs are deleted SCGCQ01288845 - (Port_Complete) - Controller does not boot up while performing cache offload . NVDATA: SCGCQ01295563 - (Closed) - rectified ctrlId from 0128 to 0122 SCGCQ01273446 - (Closed) - 24i Locate LED not working for slots on port 4 and port 5 SCGCQ01341920 - (Closed) - MR _6.14 : Drive inserted print in FW , not matching to the physically drive inserted in the Backplane. SCGCQ01282187 - (Closed) - Oracle: Ability to set persistent FW log as default via NVData CTRL-R SCGCQ01317176 - (Closed) - CTRLH: Sorting the Pds and Hot Spare drives in VD management SCGCQ01210262 - (Closed) - MR6.13_Storcli: Storcli throws wrong error message and also shows Dual error messages in detailed status SCGCQ01300711 - (Closed) - Code changes for Big Endian servers for OS detection on the VD SCGCQ01273421 - (Closed) - Port to Enclosure mapping is not correct in CTRL-R. SCGCQ01283497 - (Closed) - Handle memory leaks in getSortedPdList SCGCQ01278705 - (Closed) - Change Write Policy when create CacheCade VD in CtrlR Utility cannot show customer chose policy SCGCQ01317174 - (Closed) - Sorting the Pds and Hot Spare drives in VD management SCGCQ01325051 - (Closed) - CTRL-H: Online and UG drives are not sorted in the PD management screen. SCGCQ01312072 - (Closed) - LibMods: Sort the connector names, when the names are not in Port 0 -3 format SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public) SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01307257 - (Closed) - Disk sorting based on connector name, slot and position SCGCQ01282293 - (Closed) - LibMods changes - Add OpenSSL v1.0.2i to StorCLI SCGCQ01214425 - (Closed) - Windows Server 2016 Nanoserver GCA version validation for MR and IT -- MR 6.13/SAS3 Phase 13/14 SCGCQ01307232 - (Closed) - CTRL-R: Sort the disk based on connector name, position and slot SCGCQ01242802 - (Port_Complete) - OEM chassis in Ctrl-R utility Foreign View tab shows RAID - 00 as RAID - 1 SCGCQ01245523 - (Port_Complete) - Drive Group Id in Foreign view tab is wrongly displayed SCGCQ01232037 - (Port_Complete) - 3108 2GB MR card BIOS CTrl-H: disks list in VD Mgmt incorrect. SCGCQ01249538 - (Port_Complete) - Libmods: SCGCQ01214152 - Storcli fails with segmentation fault (core dumped) with foreign import SCGCQ01267606 - (Port_Complete) - (Libmods) Isolating faulty cable issue from bad drive issue for controllers (Invader and Intruder) SCGCQ01283479 - (Port_Complete) - Prepare To Transport SCGCQ01176928 - (Port_Complete) - Updated the string from "Instant Secure Erase" to "Cryptographic Erase" SCGCQ01300789 - (Port_Complete) - Libmods: Second OCR request not triggered, fired when first OCR request about to finish, but O/P shows success(SCGCQ01290216) SCGCQ01290430 - (Port_Complete) - Displays reboot message, on launching CTRL-R with controller in safe mode and Secured foreign drive. SCGCQ01283458 - (Port_Complete) - Disable security gives wrong error message when SECURE PD and Transport ready VD is present SCGCQ01283457 - (Port_Complete) - Manage Ded. HS option should not be shown when Drive Group is Transport Ready State. SCGCQ01268885 - (Port_Complete) - Solaris Sparc 11.3:After enabling largeiosupport from storcli, largeiosupport not enabled in CTRL Property. SCGCQ01300707 - (Port_Complete) - storclif64 can not create prl11 across 2 enclosure using 32 pds SCGCQ01283446 - (Port_Complete) - Rearrange Transport Ready form SCGCQ01283450 - (Port_Complete) - "Undo Prepare for Removal" needs to be removed from TR PDs SCGCQ01294079 - (Port_Complete) - CacheCade VD association returns error in Config Utility (Ctrl-R) SCGCQ01283447 - (Port_Complete) - Add Hidden field and block the Hideen VD and Transport VD in Boot Device SCGCQ01283441 - (Port_Complete) - Prepare To Transport SCGCQ01283543 - (Port_Complete) - CSCuw42102: Ctrl-R showing blank enclosure detail SCGCQ01356244 - (Port_Complete) - Ctrl-H hang during foreign import along with app tab toggling. SCGCQ01279496 - (Port_Complete) - Ctrl-R showing blank enclosure detail SCGCQ01291519 - (Port_Complete) - ventura B0 controller cannot delete Foreign config drives. BIOS SCGCQ01379238 (Port Of Defect SCGCQ01292708)-FW displays the ID in BIOS during boot up more than 1000+, even total drives is only about 160PDs SCGCQ01379365 (Port Of Defect SCGCQ01379327)-System reset is initiated twice in BIOS SCGCQ01379284 (Port Of EnhancementRequest SCGCQ01293535) - Headline: Reset Type and customer messaging for system resets initiated by controller oprom UEFI Driver SCGCQ00883008 - (Closed) - Profile Mgmt API Changes SCGCQ00886417 - (Closed) - MR_RAID_CTX_G35 has one too many bits SCGCQ00927738 - (Closed) - Reintroduce numSGEExt Field in Raid Context for Invader to support 1MB IO SCGCQ00948535 - (Closed) - The code had events with repetitive ID and some structures clashing SCGCQ01001936 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Ventura Dev API baseline dated 2015-12-23 SCGCQ01014835 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Ventura Dev API baseline dated 2015-12-23 has been added back again into adapteroperations 4 SCGCQ01242633 - (Closed) - Driver health shows as Failed even after handling the boot message. SCGCQ01289887 - (Closed) - When user unloads UEFI Driver nullify pHiiHandShakeProtocol and ask platform to free HII (memory and image handle) SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public) SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue SCGCQ01146597 - (Closed) - MR 6.12 - Add JBOD mode personality to MR_CTRL_PERSONALITY SCGCQ01141251 - (Closed) - MR 7.0: Add supportPdMapTargetId flag in MR_CTRL_INFO and MFI_CAPABILITIES SCGCQ01139344 - (Closed) - MR 6.13: Add API support for TFM/SCAP _MR_BBU_VPD_INFO_FIXED parameters SCGCQ01137627 - (Closed) - MR 6.13: Add a new control command to fetch ROC temperature data over I2C SCGCQ00867953 - (Closed) - profile management API SCGCQ00875328 - (Closed) - Mega API modifications needed for RMW-FP and Cache bypass features in Ventura SCGCQ00883262 - (Closed) - Merging api_overrides mega_api files with the files in the Mega_API development stream SCGCQ00941620 - (Closed) - Ventura: de-feature AHCI SCGCQ01023741 - (Closed) - MR_CTRL_INFO expansion from 2K to 4K SCGCQ01059740 - (Closed) - mega api changes for ibuttonless PR SCGCQ01075821 - (Closed) - Profile Management Changes to support requestedProfileID and optimisedProfile SCGCQ01094549 - (Closed) - MEGA_API Changes to incorporate new IO subtype to support redirect cached IO SCGCQ01133839 - (Closed) - MR 7.0: Add MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7 to mfi.h file SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01245780 - (Port_Complete) - EFI driver test Red-screen-of-death SCGCQ01310866 - (Port_Complete) - Return EFI_UNSUPPORTED if UEFI Driver already manages one controller. HII SCGCQ01242633 - (Closed) - Driver health shows as Failed even after handling the boot message. SCGCQ01287605 - (Closed) - When user unloads UEFI Driver nullify pHiiHandShakeProtocol and ask platform to free HII (memory and image handle) SCGCQ01325212 - (Closed) - HEFU: Don't check the return value for the function to get connector index and sorted connnector index SCGCQ01342734 - (Closed) - Incorrect Drive Group numbering in "Create Virtual Drive" menu SCGCQ01282322 - (Closed) - UseSetMem instaed of UnicodeSprint (L"") SCGCQ01312071 - (Closed) - HEFU: Sort the connector names, when the names are not in Port 0 -3 format SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public) SCGCQ01234371 - (Closed) - HEFU - Sort the disk based on connector name, slot and position SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01145318 - (Port_Complete) - Prepare To Transport SCGCQ01245780 - (Port_Complete) - EFI driver test Red-screen-of-death SCGCQ01293975 - (Port_Complete) - Cannot perform RLM in HII in certain scenario SCGCQ01282444 - (Port_Complete) - Undo Prepare for Removal" needs to be removed from TR PDs SCGCQ01333898 - (Port_Complete) - A wrong message displayed in HII reconstruction browser while trying to trigger reconstruction again SCGCQ01293002 - (Port_Complete) - For security key, the length must be upto 32 not 256 SCGCQ01293502 - (Port_Complete) - The 6G SSD Negotiated Link speed=12G in HII SCGCQ01333896 - (Port_Complete) - Need to correct the spelling mistake in the help message under the drive management page in HII SCGCQ01286463 - (Port_Complete) - MR 7.0.1 No fast/full init after creation of profile based VDs SCGCQ01293444 - (Port_Complete) - Show "Port 4-7 & Port 0-3" for all drives in the HII Drive Management when the controller uses x8 SAS link to expander SCGCQ01245896 - (Port_Complete) - MegaRAID option is listed in dashboard menu, with no options listed. SCGCQ01245792 - (Port_Complete) - 9460-16i - HDD information show messy code in BIOS when HDDs connected in LSI RAID card SCGCQ01274030 - (Port_Complete) - Fix sorting and SupportMorethan16Phys issue SCGCQ01293971 - (Port_Complete) - Unable to reconfigure RAID 0 VD to RAID 1 in HII when sufficient unconfigured good drive exists in the system. SCGCQ01282448 - (Port_Complete) - Disable security gives wrong error message when SECURE PD and Transport ready VD is presnet SCGCQ01293974 - (Port_Complete) - PCI/VPD data to be populated for MR cards-short term solution to hard code the values in Hii for Purley Launch SCGCQ01293999 - (Port_Complete) - HPE: Firmware Flash is not closed properly after the flash. Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 05/05/2017 ************************************************************************************************************************** ***********PLEASE READ IF USING CACHEVAULT OPTION ON 9361-16i MEGARAID CONTROLLERS *********************************** ************************************************************************************************************************** If using Cachevault option on your MegaRAID Controller, the CPLD component on your controller may also need to be updated. Please refer to the MR-9361-16i-AN100.pdf included in this package. If there are any questions regarding CPLD upgrade, please contact Technical Support or your Field Support team. ************************************************************************************************************************** ************************************************************************************************************************** Version Numbers: =============== Current Package Details: Firmware Package:24.19.0-0047 (MR 6.13) Firmware 4.720.00-8218 ROMENV 1.09 BootBlock 3.10.01.00-0000 NVDATA 4.2510.01-0051 UEFI_Driver v0x06160200 (SIGNED) Hii v03.23.06.00 (SIGNED w/correct Size) FCODE 4.19.08.00 BIOS 6.34.01.0 CTRL-R 5.18-0403 Previous Package Details: Firmware Package:24.17.0-0084 (MR 6.12) Firmware 4.710.00-8108 ROMENV 1.09 BootBlock 3.10.01.00-0000 NVDATA 4.25.10.01-0037 UEFI_Driver 0x06150500(signed) Hii 03.21.14.00(signed) FCODE 4.17.08.00 BIOS 6.32.02.0 CTRL-R 5.17-1300 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ01111615 - (Closed) - Changing RAID FoD key(Add/Remove) through customer application will make original VD to foreign SCGCQ01111966 - (Closed) - LSA displays discrepant information for empty backplanes SCGCQ01116419 - (Closed) - With controller operating in least latency mode, FW hits montask upon running IOs SCGCQ01117839 - (Closed) - MRFW : Exception in Core 0 while importing Foreign Config with enclosure connections swapped. SCGCQ01126892 - (Closed) - On performing DIF R6 rebuild operation result in DIF errors SCGCQ01130036 - (Closed) - PR fails to continue on PD after a USER paused Patrol read is resumed after OCR. SCGCQ01136710 - (Closed) - To fix compilation issue in 6.13 SCGCQ01139294 - (Closed) - CTRL-H allowing user to enable protection SCGCQ01144627 - (Closed) - FW hits to montask with mutipath push/pull operation SCGCQ01150161 - (Closed) - Don't allow SESVPDAssociationTypeInMultiPathCfg to change for OEM via controller property SCGCQ01151384 - (Closed) - Build the Flash Component List only if any of the image is flashed. SCGCQ01152599 - (Closed) - Assertion failure in ../../dm/mpt2/mptcmd.c at line 1418 during PD offline on R5 using DIF drives. SCGCQ01154299 - (Closed) - Dev defect: kill adapter debugging information are missing in the crash dump collection path. SCGCQ01161841 - (Closed) - IMR FW fails to support 32 configured good drives, during JBOD to good and array removal step. SCGCQ01162896 - (Closed) - In case of Raid 6 and medium error on the drives, if the driver state is manually changed to OFFLINE, FW hits a DMA error SCGCQ01169202 - (Closed) - MR_6.13 : Issuing Hibernation during rebuild with IO result to Assertion failure SCGCQ01169780 - (Closed) - After performing FW upgrade to MR 6.13 from MR 6.12, fails to enable ctrl property enable PI. SCGCQ01177023 - (Closed) - Default behavior is not set to JBOD during personality switch from EPD to JBOD SCGCQ01177948 - (Closed) - MR_6.13_FW: Kill Adapter on running multipath push pull SCGCQ01180459 - (Closed) - VD with 4Kn drives, performance is slow with 6.10/6.11. Issue not seen on 6.9 SCGCQ01187677 - (Closed) - Update the macro name as appropriate SCGCQ01191412 - (Closed) - OEM HDD LED issues SCGCQ01192863 - (Closed) - MR 6.13 Alpha OEL 7.2:MonTask: line 538 in file ../../dm/mpt2/mptcmd.c while running multipath cable breaker script SCGCQ01193231 - (Closed) - -6% to -15% Perf drop in all IO size with Higher QD in 12G SAS HDD [x16EC,x24EC,x40EC] SCGCQ01196132 - (Closed) - cachecade feature is enabled through FOD key,is not entertained unless reboot/reset the controlller SCGCQ01208120 - (Closed) - Foreign config import boundary conditions SCGCQ01208490 - (Closed) - DDR Write Timeouts with DM discovery issue SCGCQ01209604 - (Closed) - To fix 6.13 Fw coverity issues #15354, #15370 , #15442, #15745, #15755, #16014, #18206, #18327 SCGCQ01211489 - (Closed) - Fixed Coverity Issue #15363 SCGCQ01211556 - (Closed) - Fix coverity issues #15381 SCGCQ01213918 - (Closed) - Invader 6.13-Beta: MonTask: line 3386 in file ../../dm/src/devmgr.c while running JBOD IO on SAS SSD with cable pull push SCGCQ01225116 - (Closed) - MRIntru6.13RC-Win/Lin:~38% drops SW 4/8/16/32/64/128K QD(1-256) R0/R5/R6/R10 40D/24DEC/16DC 12G-SASHDD/6G-SATAHDD/12G SAS SSD SCGCQ01226439 - (Closed) - FW crash with more than 64 VD's while performing RAID->JBOD/JBOD->RAID switch SCGCQ01240031 - (Closed) - Cache Offload test fails with controllers in OEM Servers. SCGCQ01253076 - (Closed) - Cache Data lost if power loss happens during descriptor preparation. SCGCQ01260609 - (Closed) - Dev defect to address action items identified during ONFI Review SCGCQ01261213 - (Closed) - Dev defect to handle HW action items identified during Onfi Review. SCGCQ01261426 - (Closed) - Cache data Lost when Term Log is set to "on" SCGCQ01262834 - (Closed) - 6.13 ONFI_PORT: If power loss occurs after OCR, FW might lose tty log. SCGCQ01262883 - (Closed) - 6.13_ONFI_PORT: Program the erase and wait count values during ONFI Initialization. SCGCQ01262884 - (Closed) - 6.13 ONFI PORT :Set bit 0 in global Interrupt Register so that host will receive an interrupt. SCGCQ01267220 - (Closed) - Flash File System Reads fail after system reset. SCGCQ01267700 - (Closed) - FW does not remember user induced bad blocks across boots. SCGCQ01268066 - (Closed) - MR 6.13: Performance: Drops up to 30% seen across many profiles for Sequential writes for 24 SAS HDD R0 SCGCQ01273216 - (Closed) - MR_6.13:FW flash pack -30 with reboot , result to Controller hang at bios level (Power PC) SCGCQ01274494 - (Closed) - Cache Restore fails if supercap is removed while cache offload is in Progress. SCGCQ01278512 - (Closed) - Unable to set termlog on/off from storcli intermittently SCGCQ01282319 - (Closed) - After Termlog Toggling with power cycle, result to ERROR: Dirty disk cache data has been lost SCGCQ01283719 - (Closed) - Modify Read Eye Training Algorithm to make it spec compliant. SCGCQ01128576 - (Closed) - 6.13_SDS: Handling the SYNC_CACHE command for WB EPDs SCGCQ01132432 - (Closed) - Security is disabled on a OEM controller after a FOD key is added or removed until next reboot. SCGCQ01135815 - (Closed) - FW fails to import DIF arrays, after changing enable PI controller property 0 -> 1 SCGCQ01149312 - (Closed) - Dev defect: number of messages in the VDM queue is not initialized with proper values SCGCQ01155893 - (Closed) - Dev defect: To check-in specific params page update changes. SCGCQ01163849 - (Closed) - IMR_6.13: Drive is not marked as Foreign upon OCR when controller already has max configured PD's SCGCQ01167814 - (Closed) - For hidden VDs incorrect VD access Policy shown in the LSA SCGCQ01190591 - (Duplicate) - To fix coverity issues #17740, #18607 and #18206 SCGCQ01201595 - (Closed) - FW crashes during SSC VD import on a system having certain VDs SCGCQ01204801 - (Closed) - Fix the coverity issue SCGCQ01204802 - (Closed) - Fix coverity defects SCGCQ01208167 - (Closed) - Windows MR6.13 Alpha-eSDS Invader:-7 to -13% Perf Drops SR IO Sizes-4K,8K,16K QD(8) SATA SSD x8,x16,x24 PD,EPD (Coalescing) SCGCQ01208304 - (Closed) - Read timeouts observed during Cache Restore on 4gig boards. SCGCQ01263110 - (Closed) - Handling of DCR errors in MSS core SCGCQ01278480 - (Closed) - Controller does not boot up while performing cache offload . SCGCQ01117827 - (Closed) - MRFW : OCR disabled while fw downgrade from 6.12 to 6.4 SCGCQ01137690 - (Closed) - Controller exports 1 MB as IO size irrespective of its type/mode. SCGCQ01172369 - (Closed) - FW is observing Kill Adapter while CCVD disassociate in progress SCGCQ01188556 - (Closed) - Coverity defects CID 15746, 18327 and 18574 SCGCQ01191216 - (Closed) - FW crashes when LDs were deleted during rebuild operation. SCGCQ01199711 - (Closed) - FW crashes upon firing storcli show all command SCGCQ01204471 - (Closed) - Termlog is not persistent across boots when tty hist is ON. SCGCQ01208906 - (Closed) - Aborted Erase is resumed after OCR in SDS & RAID mode . SCGCQ01297565 - (Closed) - Code review: turn off the onfi when bbu is bad SCGCQ01156908 - (Closed) - PD not displayed by StorCLI, does not allow to change state of the PD as well. SCGCQ01163865 - (Closed) - MR FW returning invalid return code while setting link speed. SCGCQ01180987 - (Closed) - MR 6.13 PA3:DATA TLB Error MonTask: line 245 in file ../../raid/1078int.c after disabling multipath bit and OCR SCGCQ01187690 - (Closed) - Coverity tool issue: Code indention and Unintentional integer overflow issues SCGCQ01117190 - (Closed) - Kill Adapter on running multipath push pull SCGCQ01170701 - (Closed) - Configuration lost and system crashed on having a stale configuration connected SCGCQ01188437 - (Closed) - Fix for coverity defects CD: 17745 and CD: 18227 SCGCQ01190895 - (Closed) - RDM in Use-RDm Error & crashed into Montask during boot SCGCQ01185882 - (Closed) - Coverity Issues SCGCQ01185858 - (Closed) - Coverity : Array Out-of-bounds access error reported SCGCQ01190905 - (Closed) - Win/Lin Upto ~30% drops are observed SW for 4k/8K/16k/32K/64K/128K QD(1-256) for R0/R5/R10 for 12G SAS HDD. SCGCQ01196090 - (Closed) - Copy-Back resumes from Zero after foreign import with reboot. SCGCQ01262698 - (Closed) - Shift IOPATH code by 4 cache lines to workaround performance issue. SCGCQ01226974 - (Implemented) - Check in PL version 13.00.03.00 SCGCQ01216305 - (Implemented) - MR6.13: Disable SDS personality mode SCGCQ01187730 - (Closed) - Integrating PL(SCGCQ01183279) 13.00.01.00 in 6.13 SCGCQ01170212 - (Closed) - Autoconfig feature support for 64 VD mode. SCGCQ01156969 - (Closed) - Firmware does not turn fault LED for drives with size < 512MB SCGCQ01155304 - (Closed) - The security key lifecycle management for EKMS SCGCQ01150052 - (Closed) - Change DDR Tuning Settings in Response to ECC errors SCGCQ01141427 - (Closed) - Enable SDS personality mode SCGCQ01139341 - (Closed) - WG: Instance Validation issues pertaining to Energy pack (GET). SCGCQ01134167 - (Closed) - Need MCTP over PCIe enabled for 3108 design - unblock current MCTP/PCIe level SCGCQ01134165 - (Closed) - Adding the function that changing flag of full initialize completion SCGCQ01085797 - (Implemented) - User can save the FoD key to TMM through the MSM pop-up advanced software options. SCGCQ01265401 - (Closed) - Integrate PL 13.00.05.00 (RO SCGCQ01263844) SCGCQ01188995 - (Implemented) - Make GPIO drive strengths configurable via NVDATA. SCGCQ01156825 - (Closed) - Integrating PL(SCGCQ01140801) 13.00.00.00 to 6.13 SCGCQ01082117 - (Closed) - Change DDR Tuning Settings in Response to ECC errors SCGCQ01213219 - (Closed) - Integrating PL SCGCQ01210438 (13.00.02.00) into 6.13 . SCGCQ01210265 - (Closed) - Integrating PL (SCGCQ01208895) to 6.13 Invader SCGCQ01199671 - (Closed) - MegaRAID 3108 ROMB with 2GB DDR3 for cachevault single write mode (FW Change) SCGCQ01156111 - (Closed) - Integrating PL(SCGCQ01140806) 13.00.00.00 to MR 6.13 SCGCQ01129378 - (Closed) - SCSI SANITIZE/Crypto on JBOD Drives under MR SCGCQ01181178 - (Implemented) - Investigate on unalligned IO's for 512E drives with background operation SCGCQ00829979 - (Port_Complete) - FW upgrade from non 240VD FW to 240VD FW when OS is behind the controller results in BSOD SCGCQ00829980 - (Port_Complete) - FW upgrade from non 240VD FW to 240VD FW when OS is behind the controller results in BSOD SCGCQ00988970 - (Port_Complete) - PDs are getting swapped and starts rebuild on wrong VD after the enclosure power cycle SCGCQ01033483 - (Port_Complete) - Exception handler table is always addressed to primary FW region in iMR controller. SCGCQ01082876 - (Port_Complete) - Upgraded to MR5.14, still see "I2C 4 PID 10 SCL STUCK Low! while I2C Rx receiving data intStatus 00008000" in fw log. SCGCQ01130999 - (Port_Complete) - I/O failures observed on 4kn VD with data Protection Enabled SCGCQ01131001 - (Port_Complete) - I/O failures observed on 4kn VD with data Protection Enabled SCGCQ01132984 - (Port_Complete) - Improve performance of of Cachecade associated SVDs for 512K 100% RW FIO Workload SCGCQ01133565 - (Port_Complete) - FDE Error messages were seen due to incorrect handling of sense data SCGCQ01134074 - (Port_Complete) - Request for FW to disable all PI, and not allow to be re-enabled SCGCQ01136062 - (Port_Complete) - Data Miscompare found during recovery of CacheCade pinned windows across OCR/Reboot or discard of CacheCade pinned windows while CacheCade degrade flush in progress SCGCQ01136063 - (Port_Complete) - Data Miscompare found during recovery of CacheCade pinned windows across OCR/Reboot or discard of CacheCade pinned windows while CacheCade degrade flush in progress SCGCQ01139844 - (Port_Complete) - FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash SCGCQ01140902 - (Port_Complete) - Security is disabled on a MR Flatwoods controller after a FOD key is added or removed until next reboot. SCGCQ01141456 - (Port_Complete) - CTRL-H allowing user to enable protection . SCGCQ01145325 - (Port_Complete) - Need MCTP over PCIe enabled for 3108 design - unblock current MCTP/PCIe level SCGCQ01146497 - (Port_Complete) - EPD's are not created when pd erase is in progresss on one/more of the drive s after system reboot SCGCQ01149762 - (Port_Complete) - iMR: Drives with configuration is getting converted to JBOD if system already has maximum configurable drives. SCGCQ01149763 - (Port_Complete) - iMR: Drives with configuration is getting converted to JBOD if system already has maximum configurable drives. SCGCQ01150028 - (Port_Complete) - Dev defect: number of messages in the VDM queue is not initialized with proper values SCGCQ01150067 - (Port_Complete) - FW:Add capability to expose each SAS Expander-attached SEP as a separate Enclosure PD SCGCQ01150173 - (Port_Complete) - Request for NVdata change on 9361-8i to make the minimum stripe size 16K (instead of 64K) SCGCQ01152709 - (Port_Complete) - FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash SCGCQ01155380 - (Port_Complete) - SCSI SANITIZE/Crypto on JBOD Drives under MR SCGCQ01155454 - (Port_Complete) - L2/L3 Cache error was detected on the RAID controller during boot (24 hours after shutdown hang) SCGCQ01158838 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01163258 - (Port_Complete) - LUID gets changed during foreing import from non-240VD FW to 240VD FW SCGCQ01174094 - (Port_Complete) - Fake the progress response to application until background operation resumes SCGCQ01174409 - (Port_Complete) - Enhance code to catch Stack Overflow problem as soon as it occurs. SCGCQ01175616 - (Active) - New Erase Type CRYPTO ERASE is supported for ISE capable drives via DCMDs. SCGCQ01180170 - (Port_Complete) - Controller exports 1 MB as IO size irrespective of its type/mode. SCGCQ01180872 - (Port_Complete) - Function in FW (injectParityErr) doesn't work to generate i-cache parity error SCGCQ01184957 - (Port_Complete) - xIOV_Step2.5 : BladeErrorIsrTask while running IO's. SCGCQ01201996 - (Port_Complete) - MR7.0 - DC when a PD is made offline during RLM of single Dr. R0 to 4 Dr. R1 (PRL11) SCGCQ01202625 - (Port_Complete) - Assertion failure in ../../raid/cache.c at line 2495: during RHEL 7.1 OS boot after VDs are created SCGCQ01205307 - (Port_Complete) - Rebuild does not start when "useunconfiggoodforemergency" feature is enabled and one "prepare for removal" drive is undone. SCGCQ01205341 - (Port_Complete) - Memory size and CacheVault Flash size show wierd values SCGCQ01205429 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler SCGCQ01206978 - (Port_Complete) - FW trying ld sync for target ID beyond 63 when non-240 driver is installed SCGCQ01232058 - (Port_Complete) - FW does not fail unsupported erase type for a PD SCGCQ01235529 - (Port_Complete) - Update the MAXTransferLength properly for Driver enabled 1MB support feature SCGCQ01259337 - (Port_Complete) - ONFI: To properly handle the OCR case with RESET Status Register. SCGCQ01260470 - (Port_Complete) - COL disarmed, VDs remain in WB mode, no Administrative Messages to bad flash part. SCGCQ01260995 - (Port_Complete) - Infinite loop in onfiSyncModeEnter SCGCQ01261425 - (Port_Complete) - FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash SCGCQ01263212 - (Port_Complete) - Insertion of the boot messages and the evets for montoring the ONFI backup capacity. SCGCQ01263800 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors. SCGCQ01263859 - (Port_Complete) - Handling of DCR errors in MSS core SCGCQ01264476 - (Port_Complete) - Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970-01-28) SCGCQ01288848 - (Port_Complete) - Controller cache discarded due to memory/battery problem SCGCQ01063833 - (Port_Complete) - DC Reboot Caused an LTO Drive Attached to Controller to Load a Tape. SCGCQ01131000 - (Port_Complete) - I/O failures observed on 4kn VD with data Protection Enabled SCGCQ01131002 - (Port_Complete) - I/O failures observed on 4kn VD with data Protection Enabled SCGCQ01149114 - (Port_Complete) - Kill-adapter during rebuild, recon, and drive pull SCGCQ01170646 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs SCGCQ01180171 - (Active) - Controller exports 1 MB as IO size irrespective of its type/mode. SCGCQ01180864 - (Port_Complete) - For SES enclosures, now we call a wrapper function to get the correct slot number before setting the bad slot bitmap. SCGCQ01184451 - (Port_Complete) - Copyback not automatically initiating when manually setting drives to Unconfigured_Good SCGCQ01202208 - (Port_Complete) - IMR_6.13: Drive is not marked as Foreign upon OCR when controller already has max configured PD's SCGCQ01205397 - (Port_Complete) - Configuration lost and system crashed on having a stale configuration connected SCGCQ01255374 - (Port_Complete) - Activity LED is always ON even when no drives are present. SCGCQ01263759 - (Port_Complete) - issues in VMWare SCGCQ01289123 - (Port_Complete) - RAID10 VD goes to failed state after performing RLM SCGCQ01163768 - (Port_Complete) - LUID gets changed during foreing import from non-240VD FW to 240VD FW SCGCQ01297497 - (Port_Complete) - Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD SCGCQ01131003 - (Port_Complete) - I/O failures observed on 4kn VD with data Protection Enabled SCGCQ01141508 - (Port_Complete) - xIOV:PL Fault 0000d073/0000d101 for shutting down the host during IO in SDS,1660 in file ../../dm/pl2/pliopi.c SCGCQ01176519 - (Port_Complete) - xIOV:PL Fault 0000d073 for running IO on shared EPDs across hots with Heavy load. SCGCQ01203802 - (Port_Complete) - MR7.0 - DC when a PD is made offline during RLM of single Dr. R0 to 4 Dr. R1 (PRL11) SCGCQ01014121 - (Port_Complete) - B22 M3 LSI Controller in configuration lost state SCGCQ01158573 - (Port_Complete) - Request not to reset the Idle Timers. SCGCQ01168218 - (Port_Complete) - Raid controller stuck in montask after multiple hard reboots - (SCGCQ01118632 NVDATA: SCGCQ01255383 - (Closed) - Activity LED is always ON even when no drives are present. SCGCQ01241685 - (Closed) - Drive Strength values are incorrect for last 8 ports in some boards. SCGCQ01185624 - (Resolved) - MR_6.13 : Product name for the board should display as 9361-24i instead of 9361-16i SCGCQ01227599 - (Closed) - Activity LED is always ON even when no drives are present. SCGCQ01241479 - (Closed) - MR 6.x: Enable LDBBM by default for Channel Controllers. SCGCQ01245534 - (Closed) - MR9361-16i physical wide port numeration differs from labels and documentation SCGCQ01271659 - (Closed) - enabled LARGEIOSUPPORT for OEM nvdata SCGCQ01204501 - (Closed) - Change default drive strength values. SCGCQ01273348 - (Closed) - 9361-24i NVDATA changes SCGCQ01294598 - (Closed) - ctrl Id has been added to xml files SCGCQ01255546 - (Closed) - Correct the Man page 6 and Man Page 43 settings for channel controller. SCGCQ01268892 - (Closed) - OEM NVDATA xml modification SCGCQ01269720 - (Closed) - Disable JBOD personality(mode) for OEM SCGCQ01186255 - (Closed) - Change ManPage12 flags to let PL control LED as needed by PL. SCGCQ01245611 - (Port_Complete) - MR9361-16i physical wide port numeration differs from labels and documentation UEFI Driver: SCGCQ01134128 - (Closed) - The security key lifecycle management for EKMS SCGCQ01191839 - (Port_Complete) - RSOD encountered on reboot system SCGCQ01205305 - (Port_Complete) - EFI driver test Red-screen-of-death HII: SCGCQ01193228 - (Closed) - HII provides an option Full initialization for R60 DIF array during array creation SCGCQ01164506 - (Closed) - Title for select drive form is shown as HF030 when creating vd in raid mode SCGCQ01143300 - (Closed) - Fix HII issues related to EKMA SCGCQ00883008 - (Closed) - Profile Mgmt API Changes SCGCQ00886417 - (Closed) - MR_RAID_CTX_G35 has one too many bits SCGCQ00927738 - (Closed) - Reintroduce numSGEExt Field in Raid Context to support 1MB IO SCGCQ00948535 - (Closed) - The code had events with repetitive ID and some structures clashing SCGCQ01001936 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Dev API baseline dated 2015-12-23 SCGCQ01014835 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Dev API baseline dated 2015-12-23 has been added back again into adapteroperations 4 SCGCQ01196215 - (Closed) - ASSERT text seen on screen when entering system menu SCGCQ01138815 - (Closed) - HII- Add warning message before we change the behavior mode and it's parameters SCGCQ01164510 - (Closed) - Form title for convert JBOD s to UG when creating a vd is shown as HF041 on the confirmation page . SCGCQ01122925 - (Closed) - Error Displayed which HII Dashboard form is launched SCGCQ01214389 - (Closed) - "Check all" does not select drives during creation of VD SCGCQ01195985 - (Closed) - Create SSC VD option displayed when max VDs are configured SCGCQ01156878 - (Closed) - Switching Personality is not showing in HII SCGCQ01145633 - (Closed) - HII exits when attempted preview foreign configuration while the drives are pulled out SCGCQ01176614 - (Closed) - UCM 2.0 is not fully supported SCGCQ01167163 - (Closed) - HII:handle coverity defects SCGCQ01208732 - (Closed) - Junk value seen in JBOD to UG conversion form SCGCQ01146597 - (Closed) - MR 6.12 - Add JBOD mode personality to MR_CTRL_PERSONALITY SCGCQ01141251 - (Closed) - MR 7.0: Add supportPdMapTargetId flag in MR_CTRL_INFO and MFI_CAPABILITIES SCGCQ01139344 - (Closed) - MR 6.13: Add API support for TFM/SCAP _MR_BBU_VPD_INFO_FIXED parameters SCGCQ01137627 - (Closed) - MR 6.13: Add a new control command to fetch ROC temperature data over I2C SCGCQ00867953 - (Closed) - profile management API SCGCQ00875328 - (Closed) - Mega API modifications needed for RMW-FP and Cache bypass features SCGCQ00883262 - (Closed) - Merging api_overrides mega_api files with the files in the Mega_API development stream SCGCQ00941620 - (Closed) - de-feature AHCI SCGCQ01023741 - (Closed) - MR_CTRL_INFO expansion from 2K to 4K SCGCQ01059740 - (Closed) - mega api changes for ibuttonless PR SCGCQ01075821 - (Closed) - Profile Management Changes to support requestedProfileID and optimisedProfile SCGCQ01094549 - (Closed) - MEGA_API Changes to incorporate new IO subtype to support redirect cached IO SCGCQ01133839 - (Closed) - MR 7.0: Add MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7 to mfi.h file SCGCQ01144381 - (Implemented) - HII to support UCM 2.0 for (9361-8i) based controllers SCGCQ01134128 - (Closed) - The security key lifecycle management for EKMS SCGCQ01145284 - (Closed) - HII: Rename HBA mode to JBOD mode SCGCQ01140914 - (Port_Complete) - "Autoconfigure Raid 0" option is available in HII even in absence of ready HDDs SCGCQ01140915 - (Port_Complete) - PRL-11 VD expansion fails SCGCQ01166472 - (Port_Complete) - Form title for convert JBOD s to UG when creating a vd is shown as HF041 on the confirmation page . SCGCQ01204956 - (Port_Not_Required) - Import Foreign Config menu option is shown in HII when in HBA mode SCGCQ01204962 - (Port_Complete) - Battery Temperature is listed as High in Battery Management menu in HII when temp is 29C/84F. SCGCQ01140917 - (Port_Complete) - HII Profile VD performs a BGI after created, but displays a Default Initialization of Full or Fast at time of creation SCGCQ01204964 - (Port_Complete) - HII - Unable to change task rates with "+/-" SCGCQ01205277 - (Port_Not_Required) - HII - "Check All" does NOT select all drives when creating VD SCGCQ01169018 - (Port_Complete) - With large VDs creating from Free Space will fail on first attempt SCGCQ01205298 - (Port_Complete) - 9460-16i - Unable to migrate RAID6 to RAID5 SCGCQ01206747 - (Port_Complete) - OEM controller giving a Question Value Mismatch trying to add another VD using free space from a degraded VD. SCGCQ01191839 - (Port_Complete) - RSOD encountered on reboot system SCGCQ01205299 - (Port_Complete) - HII requires for user to enter security key three times to disable/enable pass pharse at the boot time. SCGCQ01140910 - (Port_Complete) - Incorrect drop down menu of VDs while initiating RLM for the second time in HII. SCGCQ01140911 - (Port_Complete) - With no ready disk, no. of Eligible NonRaid pds to convert to ready state shows zero SCGCQ01180959 - (Port_Complete) - Dont allow user to set 4K JBOD as a boot device from PD management SCGCQ01205305 - (Port_Complete) - EFI driver test Red-screen-of-death SCGCQ01146029 - (Port_Complete) - HII: Rename HBA mode to JBOD mode SCGCQ01166525 - (Port_Complete) - Title for select drive form is shown as HF030 when creating vd in raid mode SCGCQ01167058 - (Port_Complete) - VD creation fails with available free capacity in single disk group SCGCQ01204953 - (Port_Complete) - HII exits when attempted preview foreign configuration while the drives are pulled out BIOS: SCGCQ01200478 - (Port_Complete) - Check hostMemRequired bit at appropriate place in INT15Trapper() CTRL-R: SCGCQ01185730 - (Closed) - With controller in JBOD mode try to create VDs R1 and R0 from CTRL_H the FW breaks with Data TLB error. SCGCQ01033486 - (Closed) - Adpinfo doesn't show detail Pending Flash FW info via storcli SCGCQ01210262 - (Closed) - Storcli throws wrong error message and also shows Dual error messages in detailed status SCGCQ01281203 - (Closed) - Displays reboot message, on launching CTRL-R with controller in safe mode and Secured foreign drive. SCGCQ01064480 - (Closed) - MFI Frame alignment SCGCQ01155309 - (Closed) - Storcli SegFault -HUU update utility doesn't detect SBMezz if Foreign Config PD exist SCGCQ01184721 - (Resolved) - StorcliO Cavium CentOS : Displays Errorcode 255 for controller information (c0 show) SCGCQ01185690 - (Closed) - Removed Missing return values in Libmods SCGCQ01193194 - (Closed) - storcli crashes while trying to load configuration SCGCQ01196471 - (Closed) - Regardless of Drive availability, Ctrl-R Create vd gave an option to create array. SCGCQ01185184 - (Closed) - Removing the logically dead code from CLI. SCGCQ01185673 - (Closed) - Removing the logically dead code from Libmods SCGCQ01136658 - (Closed) - CTRL-H: Add new checkbox [Use existing security Key ] in Change security key SCGCQ01093152 - (Closed) - Correcting error messages for transport errors. SCGCQ01109142 - (Closed) - SWR_1.50 RHEL 6.8: Storcli /c0 show all is not displaying OS driver version. SCGCQ01112673 - (Closed) - Storcli needs to be fixed for maximum TR info in ctrl show all SCGCQ01138814 - (Closed) - CTRL-H- Add warning message before we change the behavior mode and it's parameters SCGCQ01264552 - (Closed) - CacheCade VD association returns error in Config Utility (Ctrl-R) SCGCQ00942269 - (Closed) - eSDS Alpha : LibMod Ctrl-R is allowing to enable and disable JBOD on the controller in SDS Mode SCGCQ01146002 - (Closed) - Ctrl-H: Overlap of config parameters in JBOD behavior mode SCGCQ01079824 - (Closed) - eSDS_1.1_HSW_Beta: Storcli after Saving and Restoring configuration using file doesn't list EPD and JBOD in PDlist type SCGCQ01139839 - (Closed) - Ctrl-R doesnt prompt for hot spare drive selection while creating Vd SCGCQ01194348 - (Closed) - Create Virtual Drive" enabled after reaching max config SCGCQ01136661 - (Closed) - CTRLH- Add error Handling for prepare for removal and undo prepare for removal SCGCQ01185187 - (Closed) - CTRL-H:handle coverity defects SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue SCGCQ01141462 - (Closed) - LibMods : Adding the function that changing flag of full initialize completion SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 (Public) SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli SCGCQ01112370 - (Implemented) - Contains Libmods changes for FRU implementation (CLI ER: SCGCQ01097099 ) SCGCQ00907898 - (Implemented) - LibMod:Add ISA and MR Personality Mode Support SCGCQ00950485 - (Closed) - Do not allow VD creation on Removal Ready PD SCGCQ01214425 - (Closed) - Windows Server 2016 Nanoserver GCA version validation for MR and IT -- MR 6.13/SAS3 Phase 13/14 SCGCQ01134132 - (Implemented) - Add support for new version OpenSSL1.02g to support "DROWN" - CVE-2016-0800 SCGCQ00879989 - (Implemented) - LibMod Changes: Add ISA and MR Personality Mode Support SCGCQ01145285 - (Implemented) - Ctrl-H - LibMods: Rename HBA mode to JBOD mode SCGCQ01245523 - (Port_Complete) - Drive Group Id in Foreign view tab is wrongly displayed SCGCQ01242802 - (Port_Complete) - Double Decker chassis in Ctrl-R utility Foreign View tab shows RAID - 00 as RAID - 1 SCGCQ01030217 - (Port_Complete) - storcli64 Emulated Physical Drive section shows incorrect capacity for 2TB 4k HDDs SCGCQ01232037 - (Port_Complete) - 3108 2GB MR card BIOS CTrl-H: disks list in VD Mgmt incorrect. SCGCQ01139832 - (Port_Complete) - SED-Ctrl-R-Security/Confirm Key is being displayed in plain text format SCGCQ00995143 - (Port_Complete) - Connector name is not in sorted state when queried from storcli . SCGCQ01046049 - (Port_Complete) - -Memory coruption message with SWR, with "eall show" command SCGCQ01176928 - (Port_Complete) - Updated the string from "Instant Secure Erase" to "Cryptographic Erase" SCGCQ00928044 - (Port_Complete) - Inconsistency in showing controller status between MSM and StorCLI for Fake Flash errors SCGCQ00928097 - (Port_Complete) - LibMod: Display connector and Enclosure information for backplane drives SCGCQ01141291 - (Port_Complete) - Ctrl-R doesnt prompt for hot spare drive selection while creating Vd SCGCQ01289083 - (Port_Complete) - CSCuw42102: Ctrl-R showing blank enclosure detail SCGCQ01279497 - (Port_Complete) - Ctrl-R showing blank enclosure detail SCGCQ01146026 - (Port_Complete) - Ctrl-H: Overlap of config parameters in JBOD behavior mode SCGCQ00928099 - (Port_Complete) - Checking-in Libmod changes for defect-SCGCQ00914834 SCGCQ01123359 - (Port_Complete) - EPMR10: CLI Checkin for PPC Little Endian Compilation. SCGCQ01144779 - (Port_Complete) - Libmod changes: Adding CLI command to display/toggle new controller property.(SCGCQ01106982) SCGCQ01276430 - (Port_Complete) - Port to Enclosure mapping is not correct in CTRL-R. SCGCQ01146785 - (Port_Complete) - Added the code to display the JBOD personality and switch between the JBOD and RAID personalities SCGCQ00928098 - (Port_Complete) - LibMods: Add support to enable/Disable of Large IO Support - 1 MB IO SCGCQ00939845 - (Port_Complete) - Buffer is not incremented when reading sector of the drive SCGCQ00942788 - (Port_Complete) - eSDS Alpha : LibMod Ctrl-R is allowing to enable and disable JBOD on the controller in SDS Mode SCGCQ01146028 - (Port_Complete) - Ctrl-H - LibMods: Rename HBA mode to JBOD mode SCGCQ01146783 - (Port_Complete) - FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash SCGCQ00928090 - (Port_Complete) - Missing WB Option SCGCQ01201335 - (Port_Complete) - sparc version storcli tool can not execute storcli /cx show for card Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.broadcom.com Command syntax: StorCLI /c0 download file=mr3316fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 10/26/16 Version Numbers: =============== Current Package Details: Firmware Package:24.17.0-0084 (MR 6.12) Firmware 4.710.00-8108 ROMENV 1.09 BootBlock 3.10.01.00-0000 NVDATA 4.25.10.01-0037 UEFI_Driver 0x06150500(signed) Hii 03.21.14.00(signed) FCODE 4.17.08.00 BIOS 6.32.02.0 Previous Package Details: N/a Bug Fixes and Enhancements: =========================== Initial Release Installation: ============= Use StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.avagotech.com Command syntax: StorCLI /c0 download file=mr3316fw.rom